Triplex-K-0 single backflow stops with shaft system

Image

Product benefits

  • Only 12 mm gradient difference
  • Only 71 cm installation opening without reverse gradient
  • Optimum for renovation
  • CCTV camera accessible
  • Optionally with height-adjustable sealing flange for waterproof concrete

Product information

  • Made of plastic
  • For installation in the floor slab
  • Type 0 tested to EN 13564
  • For rainwater
  • With 1 automatically closing backflow flap
  • With large cleaning and maintenance opening
  • Height-adjustable and rotatable top section
  • Surface water-tight reversible plate for tiled or plastic cover
    • Load class K 3
  • Connection pipes made with spigots in the factory
  • Can be retrofitted to Type 1, 2 and Type 3F as per EN 13564

Infobox

Note: If subsequent retrofitting to the fully-automatic version (Quatrix-K) is planned, the dimension Hmin: 460 mm must be taken into account.

Note: The dimension between 405 – 426 mm is achieved by cutting to length the top section.

Scale drawing
Nominal widthDimensions
DLH1H2H min.H max.
[mm][mm][mm][mm][mm][mm]
DN 10011046079217460512
DN 12512546986210460512
DN 150160504104192460512

Connection and flood module set

Image
Suitable for
  • Triplex-K backflow stops
    • DN 100 – DN 150
  • Quatrix-K backflow stops
  • All wastewater lifting plants
  • All separators
Description
  • To report a leak caused for example by a pipe bursting
  • For electrically conducting liquids
  • With volt free contact
  • Visible and audible alarms (approx. 80 dB)
  • Dimensions (width x height x depth): 160 x 120 x 75 mm
  • Protection level: IP 65
  • Operating voltage: 230 V/AC 50/60 Hz
  • Plug and use: 1.4 m
  • Overflow indicator with 10 m cable
  • Weight: 1.1 kg

lubricating grease

Conversion kit

Image
Suitable for
  • Cleaning pipes Triplex-K
  • Single back flow stops Triplex‑K‑0 Type 0
  • Single back flow stops Triplex‑K‑1 Type 1
  • Double back flow stops Triplex‑K‑2 Type 2
Description
  • Changing over to backflow stop Quatrix-K, Type 3F as per DIN EN 13564

Conversion kit

Image
Suitable for
  • Cleaning pipes Triplex-K
  • Single back flow stops Triplex‑K‑0 Type 0
  • Single back flow stops Triplex‑K‑1 Type 1
Description
  • Changing over to backflow stop Triplex-K-2, Type 2 as per DIN EN 13564

Backflow stop flap

Image
Suitable for
  • Single back flow stops Triplex‑K‑0 Type 0
  • Single back flow stops Triplex‑K‑1 Type 1
  • Double back flow stops Triplex‑K‑2 Type 2
Description
  • With push-in piece

Locking cover

Image
Suitable for
  • Single back flow stops Triplex‑K‑1 Type 1
  • Double back flow stops Triplex‑K‑2 Type 2
Description
  • With sealing rubber

Cover

Image
Suitable for
  • Cleaning pipes Triplex-K
  • Single back flow stops Triplex‑K‑0 Type 0
Description
  • With sealing rubber

Extension part

Image
Suitable for
  • Backflow stops for installation in the floor plate
  • Sinkamat-Z (underfloor)
  • Muli-UF (underfloor)
  • Triplex-K
  • Quatrix-K
Description
  • With lip seal
  • Graduated height adjustment every 116 mm
    • For Sinkamat-K maximum 2 extension pieces may be mounted
    • For Triplex-K, Quatrix-K and Muli-UF maximum 1 extension pieces may be mounted
  • Weight: 3.4 kg

Sealing flange

Image
Suitable for
  • Backflow stops for installation in the floor plate
  • Sinkamat-Z (underfloor)
  • Muli-UF (underfloor)
  • Triplex-K
  • Quatrix-K
Description
  • For building into waterproof concrete
    • Maximum groundwater level: 2 m
  • Weight: 2 kg

Top section

Image
Suitable for
  • Backflow stops for installation in the floor plate
Description
  • Weight: 2.6 kg

Reversible cover plate

Image
Suitable for
  • Backflow stops for installation in the floor plate
Description

Reversible cover plate for tile or plastic cover

  • Weight: 1 kg

Test hopper

Suitable for
  • ACO backflow stops
Description
  • For servicing all dimensions
  • Weight: 0.1 kg