Triplex-K-2 double backflow stops with shaft system
Product benefits
- Only 12 mm gradient difference
- Only 71 cm installation opening without reverse gradient
- Optimum for renovation
- CCTV camera accessible
- Optionally with height-adjustable sealing flange for waterproof concrete
Product information
- Made of plastic
- For installation in the floor slab
- Type 2 tested to EN 13564
- For non-faecal wastewater
- With 2 automatically closing backflow flaps
- Automatic closure
- Emergency valve
- With large cleaning and maintenance opening and test pipe
- Height-adjustable and rotatable top section
- Surface water-tight reversible plate for tiled or plastic cover
- Load class: K 3
- Connection pipes made with spigots in the factory
- Can be retrofitted to Type 3F as per EN 13564
Infobox
- Make your cellar backflow-proof: We can be of assistance so that you will be able to select the correct backflow protection system:
| Nominal width | Dimensions | |||||
|---|---|---|---|---|---|---|
| D | L | H1 | H2 | H min. | H max. | |
| [mm] | [mm] | [mm] | [mm] | [mm] | [mm] | |
| DN 100 | 110 | 460 | 79 | 217 | 460 | 512 |
| DN 125 | 125 | 469 | 86 | 210 | 460 | 512 |
| DN 150 | 160 | 504 | 104 | 192 | 460 | 512 |
Connection and flood module set
Suitable for
- Triplex-K backflow stops
- DN 100 – DN 150
- Quatrix-K backflow stops
- All wastewater lifting plants
- All separators
Description
- To report a leak caused for example by a pipe bursting
- For electrically conducting liquids
- With volt free contact
- Visible and audible alarms (approx. 80 dB)
- Dimensions (width x height x depth): 160 x 120 x 75 mm
- Protection level: IP 65
- Operating voltage: 230 V/AC 50/60 Hz
- Plug and use: 1.4 m
- Overflow indicator with 10 m cable
- Weight: 1.1 kg
lubricating grease
Conversion kit
Suitable for
- Cleaning pipes Triplex-K
- Single back flow stops Triplex‑K‑0 Type 0
- Single back flow stops Triplex‑K‑1 Type 1
- Double back flow stops Triplex‑K‑2 Type 2
Description
- Changing over to backflow stop Quatrix-K, Type 3F as per DIN EN 13564
Conversion kit
Suitable for
- Cleaning pipes Triplex-K
- Single back flow stops Triplex‑K‑0 Type 0
- Single back flow stops Triplex‑K‑1 Type 1
Description
- Changing over to backflow stop Triplex-K-2, Type 2 as per DIN EN 13564
Backflow stop flap
Suitable for
- Single back flow stops Triplex‑K‑0 Type 0
- Single back flow stops Triplex‑K‑1 Type 1
- Double back flow stops Triplex‑K‑2 Type 2
Description
- With push-in piece
Locking cover
Suitable for
- Single back flow stops Triplex‑K‑1 Type 1
- Double back flow stops Triplex‑K‑2 Type 2
Description
- With sealing rubber
Cover
Suitable for
- Cleaning pipes Triplex-K
- Single back flow stops Triplex‑K‑0 Type 0
Description
- With sealing rubber
Extension part
Suitable for
- Backflow stops for installation in the floor plate
- Sinkamat-Z (underfloor)
- Muli-UF (underfloor)
- Triplex-K
- Quatrix-K
Description
- With lip seal
- Graduated height adjustment every 116 mm
- For Sinkamat-K maximum 2 extension pieces may be mounted
- For Triplex-K, Quatrix-K and Muli-UF maximum 1 extension pieces may be mounted
- Weight: 3.4 kg
Sealing flange
Suitable for
- Backflow stops for installation in the floor plate
- Sinkamat-Z (underfloor)
- Muli-UF (underfloor)
- Triplex-K
- Quatrix-K
Description
- For building into waterproof concrete
- Maximum groundwater level: 2 m
- Weight: 4.2 kg
Top section
Suitable for
- Backflow stops for installation in the floor plate
Description
- Weight: 2.6 kg
Reversible cover plate
Suitable for
- Backflow stops for installation in the floor plate
Description
Reversible cover plate for tile or plastic cover
- Weight: 1 kg
Test hopper
Suitable for
- ACO backflow stops
Description
- For servicing all dimensions
- Weight: 0.1 kg