Browser not supported

You are using an old browser that we do not support anymore. Please consider using a modern web browser such as Microsoft Edge, Google Chrome or Firefox for the best website experience.

Triplex-K cleaning pipes with shaft system

Image

Product benefits

  • Only 12 mm gradient difference
  • Only 71 cm installation opening without reverse gradient
  • Optimum for renovation
  • CCTV camera accessible
  • Optionally with height-adjustable sealing flange for waterproof concrete

Product information

  • Made of plastic
  • For installation in the floor slab
  • Height-adjustable and rotatable top section
  • Surface water-tight reversible plate for tiled or plastic cover
    • Load class K 3
  • Connection pipes made with spigots in the factory
  • Can be retrofitted to Type 0, 1, 2 and Type 3F as per EN 13564

Infobox

Note: If subsequent retrofitting to the fully-automatic version (Quatrix-K) is planned, the dimension Hmin: 460 mm must be taken into account.

Note: The dimension between 405 – 426 mm is achieved by cutting to length the top section.

InstallationDescriptionNominal widthWeightItem

number
Remember
[kg]
For installation in floor plate
  • Cleaning pipe for wastewater containing faeces (black water) and water not containing faeces (grey water)
DN 10011.9620354
DN 12511.9620479
DN 15011.9620355
InstallationDescriptionNominal widthWeightItem

number
For installation in floor plate
  • Cleaning pipe for wastewater containing faeces (black water) and water not containing faeces (grey water)
DN 10011.9 kg620354
DN 12511.9 kg620479
DN 15011.9 kg620355
Scale drawing
Nominal widthDimensions
DLH1H2H min.H max.
[mm][mm][mm][mm][mm][mm]
DN 10011046079217460512
DN 12512546986210460512
DN 150160504104192460512

Connection and flood module set

Image
Suitable for
  • Triplex-K backflow stops
    • DN 100 – DN 150
  • Quatrix-K backflow stops
  • All wastewater lifting plants
  • All separators
Description
  • To report a leak caused for example by a pipe bursting
  • For electrically conducting liquids
  • With volt free contact
  • Visible and audible alarms (approx. 80 dB)
  • Dimensions (width x height x depth): 160 x 120 x 75 mm
  • Protection level: IP 65
  • Operating voltage: 230 V/AC 50/60 Hz
  • Plug and use: 1.4 m
  • Overflow indicator with 10 m cable
  • Weight: 1.1 kg

lubricating grease


Conversion kit

Image
Suitable for
  • Cleaning pipes Triplex-K
  • Single back flow stops Triplex‑K‑0 Type 0
  • Single back flow stops Triplex‑K‑1 Type 1
  • Double back flow stops Triplex‑K‑2 Type 2
Description
  • Changing over to backflow stop Quatrix-K, Type 3F as per DIN EN 13564

Conversion kit

Image
Suitable for
  • Cleaning pipes Triplex-K
  • Single back flow stops Triplex‑K‑0 Type 0
  • Single back flow stops Triplex‑K‑1 Type 1
Description
  • Changing over to backflow stop Triplex-K-2, Type 2 as per DIN EN 13564

Backflow stop flap

Image
Suitable for
  • Single back flow stops Triplex‑K‑0 Type 0
  • Single back flow stops Triplex‑K‑1 Type 1
  • Double back flow stops Triplex‑K‑2 Type 2
Description
  • With push-in piece

Locking cover

Image
Suitable for
  • Single back flow stops Triplex‑K‑1 Type 1
  • Double back flow stops Triplex‑K‑2 Type 2
Description
  • With sealing rubber

Cover

Image
Suitable for
  • Cleaning pipes Triplex-K
  • Single back flow stops Triplex‑K‑0 Type 0
Description
  • With sealing rubber

Extension part

Image
Suitable for
  • Backflow stops for installation in the floor plate
  • Sinkamat-Z (underfloor)
  • Muli-UF (underfloor)
  • Triplex-K
  • Quatrix-K
Description
  • With lip seal
  • Graduated height adjustment every 116 mm
    • For Sinkamat-K maximum 2 extension pieces may be mounted
    • For Triplex-K, Quatrix-K and Muli-UF maximum 1 extension pieces may be mounted
  • Weight: 3.4 kg

Sealing flange

Image
Suitable for
  • Backflow stops for installation in the floor plate
  • Sinkamat-Z (underfloor)
  • Muli-UF (underfloor)
  • Triplex-K
  • Quatrix-K
Description
  • For building into waterproof concrete
    • Maximum groundwater level: 2 m
  • Weight: 4.2 kg

Top section

Image
Suitable for
  • Backflow stops for installation in the floor plate
Description
  • Weight: 2.6 kg

Reversible cover plate

Image
Suitable for
  • Backflow stops for installation in the floor plate
Description

Reversible cover plate for tile or plastic cover

  • Weight: 1 kg

Test hopper

Suitable for
  • ACO backflow stops
Description
  • For servicing all dimensions
  • Weight: 0.1 kg