Muli-UF for the shell builder

Product benefits

  • Simple installation due to trade separation
  • Three inlets for selection
  • High usable volume - 27 l
  • Easy assembly and disassembly of the pump by separate pump tank
  • Fully functional floor drain in the top section

Product information

  • Areas of use:
    • Detached houses
    • For underfloor installation in frost free spaces
  • Housing made out of polyethylene
    • Two different container sizes available
    • Three horizontal DN 100 inlet sockets
    • One socket for DN 50 cable gland
    • One DN 50 ventilation socket
  • Discharge pipe connection
    • Pressure pipe connection according to EN ISO 15493 made of PVC-U; 50-40-R 1¼"
    • Integrated non-return flap
  • A stiffening is not required.

Message system with GSM module

Suitable for
  • Faecal matter backflow automatic stop Quatrix-K type 3F
  • All Muli lifting plants
  • Muli-Max
  • Sinkamat-Z (underfloor) duo
  • Grease separators
  • Measuring device for grease layers
  • Wet refuse collection systems
  • Technical processing systems
Description
  • Does not require mains power
  • Visible and audible alarms
  • 6 digital & 2 analogue freely configurable inputs
  • 1 alarm output 12V
  • Incl. GSM- aerial (2,5m wire)
  • Relaying alarms to mobile phones by SMS
  • For mounting outside the ex-area
  • Housing: 155x180 x103 mm
  • Slot for standard SIM-card
  • Protection level: IP54 (with fitted IP44 antenna socket)
  • Operating voltage: 230 V/AC 50/60 Hz
  • Weight: 2 kg

Cover plate complete incl. drain body

Spare pump unit with basket

maintenance kit

Replacement tube

Signal horn

Image
Suitable for
  • Signalling unit with voltage-free fault reporting
  • LipuSmart
  • Muli-Max with signalling unit
Description
  • 230V AC
  • Power consumption: 15mA
  • 172x70x78mm (LxBxT)
  • Protection: IP33
  • 92 dB(A)
  • Weight: 0.3 kg

Flashing light

Image
Suitable for
  • Signalling unit with voltage-free fault reporting
  • LipuSmart
  • Muli-Max with signalling unit
Description
  • 230V
  • Power consumption: 70 mA
  • Weight: 0.5 kg

Connection and flood module set

Image
Suitable for
  • Triplex-K backflow stops
    • DN 100 – DN 150
  • Quatrix-K backflow stops
  • All wastewater lifting plants
  • All separators
Description
  • To report a leak caused for example by a pipe bursting
  • For electrically conducting liquids
  • With volt free contact
  • Visible and audible alarms (approx. 80 dB)
  • Dimensions (width x height x depth): 160 x 120 x 75 mm
  • Protection level: IP 65
  • Operating voltage: 230 V/AC 50/60 Hz
  • Plug and use: 1.4 m
  • Overflow indicator with 10 m cable
  • Weight: 1.1 kg

Extension part

Image
Suitable for
  • Backflow stops for installation in the floor plate
  • Sinkamat-Z (underfloor)
  • Muli-UF (underfloor)
  • Triplex-K
  • Quatrix-K
Description
  • With lip seal
  • Graduated height adjustment every 116 mm
    • For Sinkamat-K maximum 2 extension pieces may be mounted
    • For Triplex-K, Quatrix-K and Muli-UF maximum 1 extension pieces may be mounted
  • Weight: 3.4 kg

Sealing flange

Image
Suitable for
  • Backflow stops for installation in the floor plate
  • Sinkamat-Z (underfloor)
  • Muli-UF (underfloor)
  • Triplex-K
  • Quatrix-K
Description
  • For building into waterproof concrete
    • Maximum groundwater level: 2 m
  • Weight: 2 kg

Pressure line set 50 mm diam.

Image
Suitable for
  • Sinkamat-K (underfloor)
    • Mono
    • Duo
  • Muli-UF (underground)
Description
  • 5 m pressure tube ext. diam. 50 (ID 42) with 1 ¼" PVC adaptor socket
  • Max. pressure: 6 bar
  • Weight: 4 kg