Muli-Flex
Product information
- Application:
- Multiple family houses
- Office buildings
- Industrial buildings
- Washrooms
- Parking garages
- Technical rooms
- With one or two pumps
- For installation in the base plate
- Tank from polyethylene
- Large inspection opening for easy maintanance: ∅ 480 mm
- Tank dimensions (DxH): ∅800 x 1000 mm
- Pump traverse with double special ball non-return valve, tool-free disassembly/assembly of the pump via automatic surface-water coupling
- Connection inlet piping (minimum operating volume: 30 liters, maximum operation volume: 160 liters, inlet heights measured from the upper edge of the floor to the lower edge of the inlet pipe):
- 1 x Inlet DN 100 Forsheda, inlet height 875 mm, operating volume = 30 l
- 1 x Inlet DN 100 Forsheda, inlet height 805 mm, operating volume = 50 l
- 2 x Inlet DN 100 spigot, inlet height 655 mm, operating volume = 100 l
- 1 x Inlet DN 150 spigot, inlet height 630 mm, operating volume = 105 l
- 1 x Inlet DN 100 spigot, inlet height 605 mm, operating volume = 115 l
- 1 x Inlet DN 100 Forsheda, inlet height 455 mm, operating volume = 170 l
- Pressure pipe connection:
- Pressure pipe outlet PE-HD: spigot DN 50 (∅50 mm)
- Compression fittting with adapter 1½" inner thread included
- Ventilation connection:
- Spigot DN 70 (OD 75 mm) suitable for fitting plastic or cast iron pipes
- Connecting height: 437,5 mm (measured from the upper edge of the floor to the lower edge of the inlet pipe)
- Additional connections:
- Cable duct DN 100 (OD 110 mm) spigot, 455 mm (measured from the upper edge of the floor to the lower edge of the inlet pipe)
- Total installation height with raising tube: 1070 – 1205 mm
Signalling unit
Suitable for
- Faecal matter backflow automatic stop Quatrix-K type 3F
- All Muli wastewater lifting plants
- Upstream tank plant mono/duo
- Muli-Max
- Sinkamat –K/-KD
- Sinkamat-Z
- Sinkamat-Z (underfloor)
- Duo
- LipuLift-P
Description
- Self-charging
- With floating contact
- Visual and acoustic
- Without contact transmitter
- For mounting outside the potentially explosive atmosphere
- Dimensions: 175 x 125 x 75 mm W x H x D
- Protection type: IP65
- Operating voltage: 230 V/AC 50/60 Hz
- Ready to plug in with cable: 2 m
- Weight: 1.4 kg
Connection and flood module set
Suitable for
- Triplex-K backflow stops
- DN 100 – DN 150
- Quatrix-K backflow stops
- All wastewater lifting plants
- All separators
Description
- To report a leak caused for example by a pipe bursting
- For electrically conducting liquids
- With volt free contact
- Visible and audible alarms (approx. 80 dB)
- Dimensions (width x height x depth): 160 x 120 x 75 mm
- Protection level: IP 65
- Operating voltage: 230 V/AC 50/60 Hz
- Plug and use: 1.4 m
- Overflow indicator with 10 m cable
- Weight: 1.1 kg
Stop valve 1½"
Suitable for
- Wastewater lifting plant
Description
- For hand membrane pump
- Weight: 1 kg
Three way valve 1½"
Suitable for
- Wastewater lifting plant
Description
- For hand membrane pump
- Weight: 3.3 kg
Floater
Suitable for
- Signalling unit 0150.26 73
Description
- With 10 m cable
- For separate warning system/volt free fault reporting level
- Weight: 0.5 kg
Hand membrane pump 1½"
Suitable for
- Wastewater lifting plant
Description
- For fixing to wall
- Incl. hose
- Clear width: 48 x 80 mm
- Incl, hose clamp
- Clear width: 50 x 70 mm
- Width: 12 mm
- 2 pces required
- Weight: 14.4 kg
Switching device, ACO Multi Control Mono
Suitable for
- Muli-Max
- Mono-plant
Description
- For pumps up to 5,5 kW
- Plug and use with 1.5 m mains cable
- EEC 16-plug with phase inverter
- 20 m pneumatic control line 10 x 1.5 mm
- Dynamic pressure bell
- Cable duct
- Operating voltage: 400 V
- Frequency: 50/60 Hz
- Control voltage: 230 V/AC
- Current consumption when idling: max 8 VA
- Temperature range: -20 to +60 °C
- IP 54 protection
- Weight: 4 kg
Switching device, ACO Multi Control Duo incl. Dynamic pressure bell
Suitable for
- Muli-Max
- Duo-plants
- Powerlift–P
- Muli-Flex
Description
- For pumps up to 5,5 kW
- Plug and use with 1.5 m mains cable
- EEC 16-plug with phase inverter
- 20 m pneumatic control line 10 x 1.5 mm
- Dynamic pressure bell
- Cable duct
- Operating voltage: 400 V
- Frequency: 50/60 Hz
- Control voltage: 230 V/AC
- Current consumption when idling: max 10 VA
- Temperature range: -20 to +60 ° C
- IP 54 protection
- For pumps up to 5,5 kW
- Plug and use with 1.5 m mains cable
- EEC 16-plug with phase inverter
- 20 m pneumatic control line 10 x 1.5 mm
- Dynamic pressure bell
- Cable duct
- Operating voltage: 400 V
- Frequency: 50/60 Hz
- Control voltage: 230 V/AC
- Current consumption when idling: max 10 VA
- Temperature range: -20 to +60 ° C
- IP 54 protection
- Weight: 5.4 kg
Air bubble injection
Suitable for
- Muli-Max
- Powerlift–P
- Muli-Flex
Description
- To increase operational safety (where floating surfaces are generated e.g. grease separator)
- For pneumatic level switching
- Mini compressor
- Connection: 230 V
- Plug and use
- With T-screw-in connection
- With backflow valve
- Weight: 0.6 kg
Signal horn
Suitable for
- Signalling unit with voltage-free fault reporting
- LipuSmart-P
- Muli-Max with signalling unit
- LipuLift-P
Description
- 230V AC
- Power consumption: 30mA
- Ø62x85 mm (L/B x T)
- Protection: IP66
- 95 dB(A)
- Weight: 0.3 kg
Flashing light
Suitable for
- Signalling unit with voltage-free fault reporting
- LipuSmart-P
- Muli-Max with signalling unit
- LipuLift-P
Description
- 230V
- Power consumption: 70 mA
- Weight: 0.5 kg
Pressure pick-up
Suitable for
- Control ACO Multi-Control Mono/Duo
- LipuLift-P/LipuLift-PF
- Muli-Flex
Description
- 4–20 mA
- For secure switching cable lengths > 12 m
- 0–200 mbar
- With cable for installation: 20 m
- Weight: 2 kg
Safety barrier
Suitable for
- Pressure pick-off
- Float switch with ATEX-certificate
Description
- To separate Ex-risk and secure areas
- Incl. housing
- Weight: 0.5 kg
Drill connection seal DN 110
Description
- Weight: 0.4 kg
Drill connection seal DN 150
Description
- Weight: 0.5 kg
[W] Muli-Flex - Deckel und Revisionsöffnung
Inlet valve DN 50
Suitable for
- LipuMobil-P 0,8
- Muli-Mini
Description
- Made of PVC
- DN 50
- With sealing ring as per DIN EN 19538
- Weight: 0.4 kg
Ball valve 2"
Suitable for
- Muli-Mini
Description
- As supplementary component for pressure line
- Weight: 1.5 kg
hexagonal double nipple 2" x 2"
Suitable for
- Muli-Mini
- Pressure pipe
Description
- From stainless steel, material grade 304
- For transition from female thread 2" to male thread 2” on pressure line
- Weight: 0.3 kg
Message system with GSM module
Suitable for
- All grease separators
- Grease layer thickness measuring device
- Pre-tank plants
- Technical processing systems
- Quatrix-K backflow preventer type 3F
- Sinkamat-K (underfloor) duo
- Muli lifting units
- Pumping stations
- Installation sets
Description
- Parameter via app (Android & iOs)
- Mains-independent alarm via 12V lead-gel battery
- Optical and acoustic alarm message
- Freely configurable inputs
- 6 digital inputs with LED status display
- 1 analogue
- 1 alarm output 12 V
- Alarm forwarding via SMS to mobile phones
- For mounting outside the hazardous area
- Housing: 192 x 150(with cable gland) x 100 mm (WxHxD)
- Protective doctor: IP54
- Operating voltage: 230 V/AC 50/60 Hz
- Translated with www.DeepL.com/Translator (free version)
- Weight: 2 kg
[W] 620520: Klebeflansch zu Muli-Flex
Sealing flange
Description
- Für den Einbau in WU-Beton (Bodenplatte)
- Maximaler Grundwasserstand: 2 m
- Weight: 5.6 kg
Delivery line set, AD 63 (ID 55)
Cable feedthrough ND 100
Suitable for
- LipuMax-P-B / D and LipuLift-P-B / D (only in the case of on-site fat layer measurement)
- Muli-Flex
Description
- Material: V4A
- For simple and fast sealing of up to 5 cables
- Seal against pressurised water
- Interchangeable insert 2x5mm, 2x7mm, 2x16mm, 1x12mm, 1x14mm
- Weight: 1 kg
Float switch
Suitable for
- For faecal and non-faecal wastewater
- MultiControl controls as float switches
- MultiControl controls as additional High alarm float
Description
- Housing: PRE-ELEC PP
- Degree of protection: IP68
- Switch voltage: 4-40 V
- Switch current: 1-100 mA
- Connection cable: 10m
- Switch inclination: 10°
- Protection class: II 1G Ex ia IIC T6 Ga
Flashing light
Signal horn
Suitable for
- Signalling unit
- Signalling unit with GSM module
Description
- Operating voltage: 12V DC
- Power consumption: 30 mA
- 62 x 62 x 85 mm (LxWxD)
- Degree of protection: IP66
- Noise level: 95 dB(A)
- Weight: 0.2 kg